How to coil a hose without kinks

Plants are being refreshed by gardeners to use a garden hose. In fact, they are used to clean gardens and trucks. A common garden hose anywhere between 20 to 100 feet in length. As a result, it is challenging to properly maintain and store it as it takes up a lot of space. Long hoses get the problem of being tangled every time you use them. Detangled hoses also heavy damage quickly. Hence, if you’ve experienced similar issues, we have the optimal situation for you! To put it in another way, we’re here just to help you with this how to coil a garden hose guide if you want to properly store your hose after use, save storage space, and eliminate damages.

If you don’t want t read it then here is an audio guide!

How To Coil a Garden Hose Without Kinks

The first step is always the toughest, but with effort, it’ll become easy. The same goes to rolling a garden hose. You might first wonder how you can roll up a pipe that’s also over 60 feet long. But I guarantee you that you can do it BY YOURSELF with the proper instruction and a few simple procedures. Carefully slow down while coiling a garden hose. Take your time and finish the task properly!

How To Coil a Garden Hose Without Kinks

Step 1: Reconnect the hose from faucet

You first must disconnect your garden hose from the water faucet in need to roll a hose properly. It needs to be removed from any connection and its water should be drained out.

Step 2: Detangling the Hose

Because to a few conveniences, most users choose one long hose. The long hose both are portable and can be utilized to cover a larger area. There are drawbacks as well as positives. Garden hoses tangle and must be untangled, irrespective as to how long it goes.   Zorbing the kinks in the hose pipe is the following step. You should lay the hose pipe on flat ground and straighten out the kinks yourself to achieve this.

Step 3: Drain the Hose of the any Water

The hoses still contain a small amount of water inside them despite being unplugged from the water supply or faucet. Sapping the water from such a garden hose prior coiling that is the best method. Put the entire hose on a flat surface. The hose’s end should now be positioned above the height of the shoulder. Beginning now, go from that end to the other. Owing to one end’s slight height over the other, water will drain from the lower end.

Step 4: Building a Garden Hose Coil

Let’s go on to the process involved of knotting a garden hose. Come rolling a hose from the point it connects to the water supply or faucet for the best result.

a. Are using this end of the hose to form a loop. The loops ought to have a diameter with no more than 2 to 3 feet.

b. Just so you see, there are just few multiple methods to coil a garden pipe. There really are advantages and disadvantages to each method. Here, we’ll explain the over-under method while considering all different types of user types. 

c. You should go out the first coiling process once again. Overlay the first loop with the this second one. But the third coil or loop will be placed just below first. As a results, the first will overlap the previous one and the next one will go beneath. The whole hose pipe must be ended up in this way.

Yes, we do aware because coiling a hose pipe is a hard job. But if you follow the proper methods and methods, it doesn’t come more than some few minutes. However, you can also seek the help of a friend or member of your family to assist you in coiling. That concludes the process of wrapping a hose. However, looping is not the only step in the rolling or coiling process. There is also just a tiny percentage remaining to finish.

Step 5: Attach the Hose Pipe Up

If you’ve read this far, you certainly have expertise coin iling hose lines. The hose pipes are typically manufactured of plastic and rubber. Thus, manually coiling them can’t hold them in this shape while still being stored. The coiled hose should be covered in some rope ties or solid ties. Ensure the knot are not too tight or too loose. If you covered the ropes, the coiled hose would still not unroll by itself.

We recommend attaching ties to a coiled/rolled hose multiple time for best results. The icing on the cake is to tie the hose pipes with ropes or ties. You now are knowledgeable of how to coil a garden hose following studying this. It might appear a little difficult the first time you do it. The loops could become undone or come out of coil, but with repetition, you’ll become such an expert.

Bonus Hint About Rolling Without Kinks 

The over-under technique poses challenges for many users. The loops are much more difficult to create and don’t hold up properly, that is just why. We therefore use a different technique of coiling a hose pipe for them.

Methods for Wrap a Hose to Your Arm

The other coiling processes, in addition to the looping process, are the same as the previous one. For those who struggled to make the hose lopping properly, this method is provided. Just as was earlier indicated, continue from step 1 to step 3. In step 4, grab one of the garden pipes and start to wrap it. However, in this case, we’ll construct the loops utilizing our elbow and shoulder.

A small loop will be formed by the garden hose at the elbow, following by a bigger loop at the shoulder. The elbow and shoulder should create a 90-degree angle when executing this. The hose will include a gap among each loop it creates. The final layer would be added underneath the last loop when it comes. All that’s left to do is tie the coils together along with ropes or ties.

Learn more winter! How To roll up the hose for the winter

Any season use sathe me procedures for rolling up a hose. You should coil the hose in this way after use, whether it is summer or winter. Never placed off coiling up the feller as doing so could cause serious damage and leakage. Garden hoses can be rolled and kept for later use because they aren’t as necessary in the winter. Only a handful of individuals are conscious of the useful garden hose storage hack of properly coiling and tying the pipes!

FAQs of How To coil a Hose Without Kinks

How do coiled hose be managed to keep?

Embed a PVC (polyvinyl chloride) pipe securely in the ground, then slide the coils over the top to store a coiled hose in an affordable and simple method. You could also use a sturdy wooden stick that has painted or left unfinished or a copper pipe that will acquire a beautiful patina with time.

What happens when a hose finally sorted?

Shower the outside with hot water in conjunction to the inside. It ought to be administered a good dose of reverse curve, followed by some relaxing with some residual reverse curve. Drain the water and refill it with cool water after misting the outside with it. I’m hopeful it will hold.

Hoses kink, so why?

Hoses kink regularly because of spinning or loops. Furthermore, if a rigid hose gets old, this will kink more quickly. In addition to impeding water flow and occasionally causing the hose to blow apart from the tap fitting, kinks can lead in cracks and leaks.

How To COIL A HOSE with No Kinks or Tangles!


Gardeners typically keep the hose pipes under the open sky as they are too long. The hose pipes, though, ultimately get tangled, leaking, and damaged. Understanding how to coil a garden hose is essential if you don’t want to buy it often. You should comprehend this method, as well as that used by other users. We hope that our essay on coiling a pipe will be helpful to readers. In effort for you to understand this technique from start, we tried to provide you with a clear idea. So, take our advice and get rid of unwanted garden hoses which are tangled, damaged, and leaking!

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.